||DN32-DN1600 (1 1/4″-64″)
||Ductile Iron, WCB, Stainless Steel, Duplex, Alu-Bronze, Monel,
||Buna, EPDM, Viton, Silicone
||420/304/316 Stainless Steel, Monel, Duplex, Super Duplex
||Potable/Waste/Sea Water, Cooling Systems, Oil, Gases, Air
||PN10/16/25-ANSI 150/300 LBS
Generally classed as an economical and general purpose solution the wafer pattern butterfly valve features a single Piece body with four flanged hole drillings for easy maintenance and installation between flanges at desired locations within the pipeline where weight and space saving is a priority. This TTV Butterfly Valve is suitable for both on and off or throttling applications.
TTV Butterfly Valves concentric design features an elastic, replaceable or vulcanized seat that takes the shape of both the inside and partially outer side of the body of the valve to form a perfect seal with relevant pipe flanges.
A single piece shaft design brings high strength and engineering with direct mount capabilities for actuation assemblies. The “Dry Shaft” feature ensures fluid is again isolated from both the shaft and the body of the butterfly valve.
Hand Polished Wafer Pattern Butterfly Valves
Hand polished, streamlined discs produce a much greater Cv than other butterfly valves on the market resulting in low pressure drops and reduced energy costs while maintaining a bi-directional bubble tight seal in the closed position. Low operational torque reduces the costs of gear, pneumatic and electric actuation with low friction contact extending the life of the self cleaning seal.
Replaceable seals offer flexibility and cost effective solutions without the cost of a complete new valve. Reducing lead times and unnecessary downtime for End Users.
||EN 12266-1, DIN 3230, BS 6755, ISO 5208, Body: 1,5 x PN, Seal: 1,1 x PN
||ISO 7005, DIN 2501, BS 4504, ANSI Class 150: ANSI B16.5
|Face 2 Face:
||EN 558 Series 20, ISO 5752 Series 20, API 609 Table 1, BS 5155 Series 4
||ISO 5208, 100% Tight Shut Off, API 598