Wras Ball Valves are designed specifically for use in accordance with the Water Byelaws and Water Fittings Regulations, so if you're looking for ways to help your customers comply with these regulations then our products could be exactly what you need. Actreg Pneumatic Actuators are the perfect solution for installations that require frequent on/off cycles. Designed specifically to work in applications where material handling is required, these devices can be rated up safely and securely with a high safety integrity level (SIL 3). Easily integrated into existing systems using industry standard NAMUR mountings (VDE/VDI 3845). This standardisation allow users to integrate the unit with future upgrades or replacements without having to redesign entire systems.

By switching from conventional ball valves to our low torque AV-L2000 Ball Valve, you'll save money on installation costs and maintenance while improving overall reliability. Our product is designed with the end-user in mind and we understand what works best for industrial automation. The Actreg Pneumatic Actuator is manufactured according to ISO 5211 standards with a star drive that provides extra flexibility and simplicity for direct mounting to valve spindles or output shafts. This makes it easy to convert electric system to pneumatic if required. Whether your application requires an actuator to be perform hundred or cycles per day or a unit that may be operations several per month the Actreg actuator is there when you need it with the ability to instantly respond when tasked or spring fail closed upon air or signal failure.

If you’re looking for an alternative solution then look no further than our AV-L3000 Series Actuated Ball Valves. These products offer improved sealing capabilities while also reducing operating costs thanks to their low torque requirements. Actreg actuators offer NAMUR mounting (VDE/VDI 3845) allowing for easy integration with the additional ancillary products including solenoid valves and valve position monitors that might be required for application or operational needs. Actuation Valve can also supply a range of accessories for you actuator. The Actreg Pneumatic Actuator features a specially coated steel piston and utilises high quality materials that do not fail when when exposed to moisture, dust or dirt. A 3-Way guide enables low friction between the body and pistons extending life expectancy and reliability. 

The industry-leading AV-L8000FS Ball Valve has been designed specifically for small to medium sized control systems with reduced torques. This can help reduce costs and increase performance by allowing smooth operation from your valves. These heavy duty ball valves for high temperature and pressure applications are designed to last in the harshest environments and provide reliable performance every time. They're built with stainless steel bodies for strength, durability and corrosion resistance at its core design features. Compact and simple yet effective design the Actreg range of pneumatic actuators offer easy integration of both new and existing systems. Direct Mount capabilities and simple mounting kit assemblies which can be provided to suit your valve.

The AV-L8000FC heavy duty ball valves is suitable for use on heavy duty industrial applications where higher pressure ranges or temperatures may be required. The Valve features PTFE TFM 4215 ball seats with grafoil stem sealing. We've made it easy for anyone to maintain the valve by replacing individual parts if necessary (Seats & Seals). This makes preventive maintenance much cheaper and easier than traditional ball valves, which require complete disassembly every time something needs to be fixed or replaced. The Actreg actuator design incorporates features which allow for use under adverse conditions such as high and Low temperatures. This includes special FKM o’rings for high temperature (150ºC) and Silicone o’rings for ambient operation conditions as low as -55Cº.

Actuation Valve provide fast turnaround times without sacrificing quality or expertise and all orders come with a two page test report detailing all opening/closing times on each valve tested. Whether you need one product or several hundred off-the-shelf parts, we can deliver. The AV-L6100 Actuated Ball Valves are an excellent choice for use in harsh or corrosive environments that aren't suitable to standard ranges. With their CF8M body and ball made from high quality stainless steel, these valves can withstand even the most demanding conditions. Each individual actuator retains its full traceability all the way back to the factory with a unique serial number. All assemblies performed by Actuation Valve in house also detail and cross reference this serial number with accompanying valves and accessories in a build sheet format.

The AV-L61C0 Ball Valve is an excellent choice for high volume pneumatic systems because it has low torque requirements, which reduce the costs of Actuated Valves with smaller actuators able to automate valves usually demanding large units. Actreg's Actuator is built for long-lasting, reliable performance with a wide variety of materials and options that allow you to specify alternate coatings that are best suited for your application requirements. The pneumatic actuators combine quality parts designed over many years by in field experts. All available at a competitive price point. High strength aluminium design reduces overall material whilst maintaining superior performance levels over comparable pneumatic actuators on the market. This lightweight unit reduces stress on supporting structures and products.

These PN 16 rated two-piece fullbore ball valves compromise of a ductile iron body with a brass ball and stem or stainless steel ball and stem. Their flanged body design also offers a direct ISO mounting pad for various actuation capabilities. Although PN 16 rated the AV-5561 comes with flange connections to suit ANSI 150 flanges. Reinforced PTFE seals come as standard offering greater wear resistance. Sizes range from a half inch nominal bore through to 8 inch nominal bore from stock for same or next day delivery options. This is robust and reliable quarter turn ball valve can be used for multiple industries and applications. For technical advice we can specify if this valve is suitable for your requirements.Compact and simple yet effective design the Actreg range of pneumatic actuators offer easy integration of both new and existing systems. Direct Mount capabilities and simple mounting kit assemblies which can be provided to suit your valve.

WRAS approved TFM 1600 PTFE seats ensure safe operation while our FDA-approved materials provide peace of mind knowing your products will be handled safely without compromising quality or performance when used correctly. The Actreg Pneumatic Actuator is manufactured according to ISO 5211 standards with a star drive that provides extra flexibility and simplicity for direct mounting to valve spindles or output shafts. This makes it easy to convert electric system to pneumatic if required. Stock range of couplings and brackets available to suit the Actreg range of actuators and any valves that require the linkages. This enables Actuation Valve to offer a quick lead time and turnaround for all actuated valve packages involving the Actreg unit.

Low Torque requirements from the AV-L6KC0 Ball Valve allow for smooth operation and reduce the costs of Actuated Ball Valves with smaller Actuators able to automate Valves usually demanding large units. Our range of Carbon Steel ball valves have been designed to meet your needs applications with pressure requirements up to 16 bar where long life expectancy is important. We also offer our ball valves in numerous sizes so you can be sure we’ll have what you need. Position indicators available for the Actreg actuator include direct mounting puk sensors such as P&F, IFM and other manufactures depending on end user approved vendor lists (AVL’s). Position monitoring switch boxes and sensors are also available from stock for quick assembly.

These PN 16 rated two-piece fullbore ball valves compromise of a ductile iron body with a brass ball and stem or stainless steel ball and stem. Their flanged body design also offers a direct ISO mounting pad for various actuation capabilities. Reinforced PTFE seals come as standard offering greater wear resistance. Sizes range from a half inch nominal bore through to 8 inch nominal bore from stock for same or next day delivery options. This is robust and reliable quarter turn ball valve can be used for multiple industries and applications. For technical advice we can specify if this valve is suitable for your requirements. The Actreg actuator design incorporates features which allow for use under adverse conditions such as high and Low temperatures. This includes special FKM o’rings for high temperature (150ºC) and Silicone o’rings for ambient operation conditions as low as -55Cº.

Easily identifiable in field operation with varied end cap design for double or single acting actuators without the need for labelling or serial code traceability if worn or removed. End caps are epoxy coated as standard protecting them against environmental corrosion. Actreg's Actuator is built for long-lasting, reliable performance with a wide variety of materials and options that allow you to specify alternate coatings that are best suited for your application requirements. The pneumatic actuators combine quality parts designed over many years by in field experts. All available at a competitive price point. The AV-L6N00 line of stainless steel ball valves is designed with you in mind. They're easy to install and incredibly durable so you get the most out of your product without worrying about repairs or replacements down the road.

The AV-L6NC0 Ball Valves are silicone free and suitable for use on oils based paint products and applications. This allows complete assurance that the Valve will not apply any contamination to the medium that could effect the end finish. Extremely important in car manufacturing. Optional installation for both across line. The design of the Actreg actuator allows for both setups depending on application requirements where space saving may be required. A typical inline mounting would be for uses involving hopper line actuation and bagging lines. Each individual actuator retains its full traceability all the way back to the factory with a unique serial number. All assemblies performed by Actuation Valve in house also detail and cross reference this serial number with accompanying valves and accessories in a build sheet format.

The The AV-L9CB0AC & AV-L91B0AC form part of the sanitary and hygienic full bore actuated valve packages from actuation valve. This 3 piece body valve has a swing out centre section that is perfect for scheduled maintenance and seat replacements. The full bore body design and cavity filled seats create a free flow path that does not allow debris or contaminents to build up with temperatures suitable for up to 200 DegC steam cleaning CIP and SIS. Various approvals inlcude FDA & Wras approved seats with a bovine free supply. Position indicators available for the Actreg actuator include direct mounting puk sensors such as P&F, IFM and other manufactures depending on end user approved vendor lists (AVL’s). Position monitoring switch boxes and sensors are also available from stock for quick assembly. 

The The AV-L3WCFCAT & AV-L3WCFBAT form part of the sanitary and hygienic full bore actuated valve packages from actuation valve. This 3 piece body valve has a swing out centre section that is perfect for scheduled maintenance and seat replacements. The full bore body design and cavity filled seats create a free flow path that does not allow debris or contaminents to build up with temperatures suitable for up to 200 DegC steam cleaning CIP and SIS. Various approvals inlcude FDA & Wras approved seats with a bovine free supply. Actreg Pneumatic Actuators are designed specifically for critical installations where downtime is not an option. Ideal for applications where frequent On/Off cycles are required such as material handling. Actreg Actuators are rated to SIL 3 (Safety Integrity Level).

We assemble and test all of our products in-house so we can control everything and make sure you get a high quality product that will last. All of our products come with a two page test report detailing every aspect of operation including opening/closing times and pressure ratings. The AV-L5K00 & 5N00 3-Way Ball Valve is available with two configurations. L Port & T Port. The difference between the two is that the L Port version can offer complete shutoff depending on actuator type where as the T Port offers diversion only or constant flow form one port to another. Actreg specialise in the manufacture of high quality, reliable valve actuators that are suitable for some of the most demanding applications. Established in 1992 the multi national company offers worldwide site and after sales support with extensive product warranty.

The AV-L5000 & 5100 3-Way Ball Valves are silicone free and suitable for use on oils based paint products and applications. This allows complete assurance that the Valve will not apply any contamination to the medium that could effect the end finish. Whether your application requires an actuator to be perform hundred or cycles per day or a unit that may be operations several per month the Actreg actuator is there when you need it with the ability to instantly respond when tasked or spring fail closed upon air or signal failure. Actreg specialise in the manufacture of high quality, reliable valve actuators that are suitable for some of the most demanding applications. Established in 1992 the multi national company offers worldwide site and after sales support with extensive product warranty.

The AV-L5300 & 5400 Full Bore 3-Way Ball Valves are silicone free and suitable for use on oils based paint products and applications. This allows complete assurance that the Valve will not apply any contamination to the medium that could effect the end finish. Actreg's Actuator is built for long-lasting, reliable performance with a wide variety of materials and options that allow you to specify alternate coatings that are best suited for your application requirements. The pneumatic actuators combine quality parts designed over many years by in field experts. All available at a competitive price point. The Actreg pneumatic is actuator available in double acting and spring return models with torque capabilities of up to 6500NM for for their rack and pinion design. All actuators come complete with manual adjustment stops for accurate valve actuation up to 5º in open and closed positions.