Affordable motorised valves. Available with Torque Outputs up to 40NM the AV-LITE® Electric Actuators are also available as stand alone units and come complete with Direct Mount capabilities for your ISO 5211 Valves in 110VAC, 230VAC & 24VDC. The AV-LITE Nylon housing is rated both Waterproof & Dustproof to IP67 and is resistance to heat, acid and alkali. The compact motor offers low power consumption with an internal overheating protection device. All models offer constant mechanical and visual position indication at the top of the Actuator cover and can also be wired to a control box for signal feedback.

Wras Ball Valves are designed with The Water Regulations Advisory Scheme in mind. They have been created so that it's easier for you to comply with WRAS regulations and ensure your business or organisation is safe from fines or prosecution due to non-compliance. The Wras ball valve is easy to install, operates smoothly, and closes quickly with minimal effort. This industrial grade product can handle up to 40 bar working pressures when used in applications where PN40 ratings are required. We assemble and test all of our products in-house so we can control everything and make sure you get a high quality product that will last. All of our products come with a two page test report detailing every aspect of operation including opening/closing times and pressure ratings.

Size Range:	DN15-DN100 (1/2"-4")
Body Materials:	Brass CW 617 N
Body Type:	Full Bore, 2 Piece
Applications:	Water, Gas, Air, Drinking Water, Waste Water (See Chart For More)
Pressure Rating:	1000 PSI
End Connections:	Screwed BSPP

Find Out More

With a compact body design taking up less space in the pipeline this two piece full bore stainless steel ball valve will save you time on installation by reducing the overall weight and cost of the actuated valve package when compared to 3 piece ball valves. This ball valve package is available with screwed connections NPT & BSP and they work great in any application where a flow control device is needed. They're fully compliant with safety standards so they'll keep your workplace safe while being easy on your budget at the same time. If you’re looking for an alternative solution then look no further than our AV-L2000 Series Actuated Ball Valves. This product offers improved sealing capabilities while also reducing operating costs thanks to their low torque requirements.

Size Range:	DN08-DN80 (1/4"-3")
Body Materials:	Stainless Steel A351 CF8M 316
Body Type:	Full Bore, 2 Piece
Applications:	Water, Gas, Air, Oil, Waste Water (See Chart For More)
Pressure Rating:	1000 PSI
End Connections:	Screwed BSPP/NPT

Find Out More

The industry-leading AV-L3000AV Ball Valve has been designed specifically for small to medium sized control systems with reduced torques. This can help reduce costs and increase performance by allowing smooth operation from your valves. Our team has decades of experience working with complex automation systems, which means we can provide high quality products quickly and affordably. Simply tell us what you need, and we'll take care of everything else. By using a 3-piece design we can easily remove the center section for seal replacements without having to take apart the entire valve. This allows us to keep your equipment running smoothly and efficiently with minimal downtime required for maintenance work on your end.

Size Range:	DN08-DN100 (1/4"-4")
Body Materials:	Stainless Steel A351 CF8M 316
Body Type:	Full Bore, 3 Piece
Applications:	Water, Gas, Air, Oil, Waste Water (See Chart For More)
Pressure Rating:	1000 PSI
End Connections:	Screwed BSPP/NPT, Butt Weld, Socket Weld

Find Out More

The AV-L8000FSAV heavy duty ball valves is suitable for use on heavy duty industrial applications where higher pressure ranges or temperatures may be required. The Valve features PTFE TFM 4215 ball seats with grafoil stem sealing. The industry-leading AV-L8000FSAV Ball Valve has been designed specifically for small to medium sized control systems with reduced torques. This can help reduce costs and increase performance by allowing smooth operation from your valves. Our team has decades of experience working with complex automation systems, which means we can provide high quality products quickly and affordably. Simply tell us what you need, and we'll take care of everything else.

Size Range:	DN08-DN50 (1/4"-2")
Body Materials:	Stainless Steel A351 CF8M 316
Body Type:	Full Bore, 3 Piece
Applications:	Water, Gas, Air, Oil, Waste Water (See Chart For More)
Pressure Rating:	2000 PSI (1/4" - 1") 1500 PSI (1 1/4" - 2")
End Connections:	Screwed, Butt Weld, Socket Weld

Find Out More

The AV-L8000FCAV Heavy Duty Carbon Steel Ball Valve is designed for use on heavy duty industrial applications where higher pressure ranges or temperatures may be required. This ball valve features PTFE TFM 4215 ball seats with grafoil stem sealing and carbon steel body. The Carbon Steel Ball Valve is affordable enough for residential use and durable enough for commercial applications. It's made from high quality materials that will last for many years without excessive wear seen in some other Manufacturers Valves. This isolation Ball Valve features an innovative 3 piece body design that allows for future proof preventive maintenance schedules by easily removing one section of the body at a time for seal replacements instead of having to take apart the entire valve each time your schedule requires.

Size Range:	DN08-DN50 (1/4"-2")
Body Materials:	ASTM A216 WCB Carbon Steel
Body Type:	Full Bore, 3 Piece
Applications:	Water, Gas, Air, Oil, Waste Water (See Chart For More)
Pressure Rating:	2000 PSI (1/4" - 1") 1500 PSI (1 1/4" - 2")
End Connections:	Screwed, Socket Weld

Find Out More

WRAS approved TFM 1600 PTFE seats ensure safe operation while our FDA-approved materials provide peace of mind knowing your products will be handled safely without compromising quality or performance when used correctly. This package is a perfect choice for those who need to deal with medium aggressive water conditions and harsh external environments. It has been designed using only high quality materials from the manufacturer Kingdom Controls. The valve features a direct mount actuation pad for quick and easy automation. This allows us to get products out of the door to you quicker whilst also reducing the overall footprint of package and most importantly wight and cost.

Size Range:	DN15-DN200 (1/2"-8")
Body Materials:	Stainless Steel A351 CF8M 316
Body Type:	Full Bore, 2 Piece
Applications:	Water, Gas, Air, Oil, Waste Water (See Chart For More)
Pressure Rating:	20 Bar
End Connections:	Flanged ANSI 150

Find Out More

The AV-L6K00AV Actuated Ball Valves are an excellent choice for use in harsh or corrosive environments that aren't suitable to standard ranges. With their CF8M body and BALL made from high quality stainless steel, these valves can withstand even the most demanding conditions. The AV-L6K00AV stainless steel ball valves can be used on oils based paints and coatings applications such as automotive refinishing. They're 100% silicone free so they won't contaminate your product or leave behind residue which can ruin your finish over time. We assemble and test all of our products in-house so we can control everything and make sure you get a high quality product that will last. All of our products come with a two page test report detailing every aspect of operation including opening/closing times and pressure ratings.

Size Range:	DN15-DN150 (1/2"-6")
Body Materials:	Stainless Steel A351 CF8M 316
Body Type:	Full Bore, 2 Piece
Applications:	Water, Gas, Air, Oil, Waste Water (See Chart For More)
Pressure Rating:	16 Bar
End Connections:	Flanged DIN PN16

Find Out More

Our range of stainless steel ball valves have been designed to meet your needs applications with pressure requirements up to 40 bar where long life expectancy is important. We also offer our ball valves in numerous sizes so you can be sure we’ll have what you need. Our team has decades of experience working with complex automation systems, which means we can provide high quality products quickly and affordably. Simply tell us what you need, and we'll take care of everything else. This package is a perfect choice for those who need to deal with medium aggressive water conditions and harsh external environments. It has been designed using only high quality materials from the manufacturer Kingdom Controls.

Size Range:	DN15-DN150 (1/2"-6")
Body Materials:	Stainless Steel A351 CF8M 316
Body Type:	Full Bore, 2 Piece
Applications:	Water, Gas, Air, Oil, Waste Water (See Chart For More)
Pressure Rating:	40 Bar
End Connections:	Flanged DIN PN40

Find Out More

The AV-L91B0AV & AV-L9CB0AV form part of the sanitary and hygienic full bore actuated valve packages from actuation valve. This 3 piece body valve has a swing out centre section that is perfect for scheduled maintenance and seat replacements. The full bore body design and cavity filled seats create a free flow path that does not allow debris or contaminents to build up with temperatures suitable for up to 200 DegC steam cleaning CIP and SIS. Various approvals inlcude FDA & Wras approved seats with a bovine free supply. Actuation Valve provide fast turnaround times without sacrificing quality or expertise and all orders come with a two page test report detailing all opening/closing times on each valve tested. Whether you need one product or several hundred off-the-shelf parts, we can deliver. Low Torque requirements from the AV-L91B0AV & AV-L9CB0AV Ball Valve allow for smooth operation and reduce the costs of Actuated Ball Valves with smaller Actuators able to automate Valves usually demanding large units.

Size Range:	DN15-DN100 (1/2"-4")
Body Materials:	Stainless Steel A351 CF8M 316, CF3M 316L Weld Ends
Body Type:	Full Bore, 3 Piece
Applications:	Food & Beverage, Brewing, Dairy, Consumer Health, Pharma
Pressure Rating:	400 PSI
End Connections:	Clamp & Hygienic Weld BS4825

Find Out More

The AV-L3WCFCAV & AV-L3WCFBAV form part of the sanitary and hygienic full bore actuated valve packages from actuation valve. This 3 piece body valve has a swing out centre section that is perfect for scheduled maintenance and seat replacements. The full bore body design and cavity filled seats create a free flow path that does not allow debris or contaminents to build up with temperatures suitable for up to 200 DegC steam cleaning CIP and SIS. Various approvals inlcude FDA & Wras approved seats with a bovine free supply. Actuation Valve provide fast turnaround times without sacrificing quality or expertise and all orders come with a two page test report detailing all opening/closing times on each valve tested. Whether you need one product or several hundred off-the-shelf parts, we can deliver. Low Torque requirements from the AV-L91B0AV & AV-L9CB0AV Ball Valve allow for smooth operation and reduce the costs of Actuated Ball Valves with smaller Actuators able to automate Valves usually demanding large units.

Size Range:	DN15-DN100 (1/2"-4")
Body Materials:	Stainless Steel A351 CF8M 316, CF3M 316L Weld Ends
Body Type:	Full Bore, 3-Way, Diverting, L Port, T Port
Applications:	Food & Beverage, Brewing, Dairy, Consumer Health, Pharma
Pressure Rating:	400 PSI
End Connections:	Clamp & Hygienic Weld BS4825

The AV-L5K00AV & 5N00AV 3-Way Ball Valve is suited to DIN flanged connections and the stainless steel body houses either an L or T drilled ball configuration. The L port valve is drilled at 90 degrees from two different sides to resemble an L whereas the T also features one hole straight through. 3-Way Ball Valves can be used to divert flow from one fluid flow path to another in industrial process systems. 3-Way Ball Valves are typically used in the process industry to connect, disconnect or redirect flow between two or more fluid flow paths. The industry-leading AV-L5K00AV & 5N00AV Multiport 3-Way Ball Valve has been designed specifically for small to medium sized control systems with reduced torques. This can help reduce costs and increase performance by allowing smooth operation from your valves.

Size Range:	DN15-DN100 (1/2"-4")
Body Materials:	Stainless Steel A351 CF8M 316
Body Type:	Full Bore, 3-Way, Diverting, L Port, T Port
Applications:	Water, Gas, Air, Oil, Waste Water (See Chart For More)
Pressure Rating:	16-40 Bar
End connections:	Flanged PN16/PN40

Find Out More

3-Way Ball Valves are generally used as multi port or multi position valves. They allow the diverting and mixing of certain flow paths from alternate connecting pipelines. Depending on your requirements this can either be with an L or T Port configuration. Available in screwed connections NPT & BSP the versatile and economical Valve comes with a WRAS (Water Regulations Advisory Scheme) Certified TFM 1600 PTFE Seat which is also FDA approved. The 3-Way diverter valve features a direct mount actuation pad for quick and easy automation. This allows us to get products out of the door to you quicker whilst also reducing the overall footprint of package and most importantly wight and cost.

Size Range:	DN08-DN100 (1/4"-4")
Body Materials:	Stainless Steel A351 CF8M 316
Body Type:	Reduced Bore, 3-Way, Diverting, L Port, T Port
Applications:	Water, Gas, Air, Oil, Waste Water (See Chart For More)
Pressure Rating:	1000 PSI
End connections:	Screwed BSPP/NPT

Find Out More

This 3-Way ball valve is available in screwed connections NPT & BSP and they work great in any application where a flow control device is needed. They're fully compliant with safety standards so they'll keep your workplace safe while being easy on your budget at the same time. The AV-L5000AV & 5100AV Screwed 3-Way Stainless Steel Ball Valve is a versatile, economical and durable valve which has been developed specifically to provide long service life for applications where reliability is key. Three way ball valves are commonly used to control the direction of fluids. They can be configured as diverter or selector valves, depending on you application requirements. L or T Port Configurations are available with 90 Degree or 180 Degree Actuators.

Size Range:	DN08-DN100 (1/4"-4")
Body Materials:	Stainless Steel A351 CF8M 316
Body Type:	Full Bore, 3-Way, Diverting, L Port, T Port
Applications:	Water, Gas, Air, Oil, Waste Water (See Chart For More)
Pressure Rating:	1000 PSI
End connections:	Screwed BSPP/NPT

Find Out More

A motorised valve uses an electric actuator to open or close a valve without requiring manual operation. When an electrical signal is received, the actuator rotates the valve stem to control the flow of water, air, oil or other compatible media. Motorised ball valves are commonly used in automated process systems, HVAC installations and industrial pipework where remote operation is required.

The main difference is how the valve operates. Manual valves require an operator to physically turn a handle or lever, whereas electric valves use a powered actuator to control their position. Electrically actuated valves can be operated remotely and integrated into control systems, making them particularly useful for inaccessible installations or applications requiring regular opening and closing.

Our AV-LITE electric actuated ball valves are available with 24V DC, 110V AC and 230V AC power supplies. The appropriate voltage depends on the electrical supply available and the requirements of the control system. It is important to confirm the correct voltage before ordering to ensure compatibility with the installation.

Yes, motorised ball valves are widely used in water distribution, treatment and general water control applications. Depending on the valve body, sealing materials and pressure rating, they can be suitable for clean water, wastewater and other water-based systems. For drinking water installations, the relevant materials and approvals should be checked to ensure compliance with the intended application.

Yes, electric ball valves can be connected to suitable control equipment for remote operation. This allows operators to open or close valves without accessing them physically. AV-LITE actuators also provide local position indication and can be wired to a control box for position feedback, helping operators monitor valve status within an automated installation.

A 2-way motorised ball valve has one inlet and one outlet and is typically used to start or stop flow through a pipeline. A 3-way valve has three connections and can be configured to divert or direct flow between different pipework routes. Three-way valves are available with L-port and T-port ball configurations, with the correct choice depending on the required flow arrangement.

An IP67 rating indicates that the actuator enclosure is dust-tight and protected against temporary immersion in water under specified test conditions. AV-LITE electric actuators feature IP67-rated nylon housings, providing protection against dust and moisture in suitable industrial environments. However, the rating does not mean the actuator is intended for continuous underwater operation.

Selecting the correct electric ball valve involves considering the pipe diameter, operating pressure, temperature, flow requirements and media being controlled. The valve's connection type and required operating torque must also be considered. Actuation Valve offers a range of screwed, flanged and welded connections, with different body materials and pressure ratings to suit individual installation requirements.

Not necessarily. Standard AV-LITE electric ball valve assemblies operate using a power-open, power-close arrangement, meaning electrical power is required to drive the valve between positions. They should not be assumed to automatically return to a safe position during a power failure. Applications requiring fail-safe operation should be assessed separately to determine a suitable actuator and control arrangement.

Electrically actuated ball valves are available in several body materials, including stainless steel, carbon steel and brass. Stainless steel is commonly selected for applications requiring corrosion resistance, while brass is frequently used in compatible general-purpose services. Carbon steel can be suitable for various industrial applications. Material selection should always consider the process media, temperature, pressure and environmental conditions.

Yes, electric motorised valves are commonly incorporated into automated industrial systems where repeatable valve operation is required. Applications include water treatment, manufacturing, chemical processing, HVAC and general process control. AV-LITE electric actuators offer compact construction, visual position indication and electrical feedback capabilities, making them suitable for a range of automated on/off valve applications.

Yes, Actuation Valve assembles and tests its actuated valve packages in-house before dispatch. Completed assemblies undergo operational checks to verify correct opening and closing, with test documentation detailing relevant operating information, including opening and closing times. This helps ensure the supplied electric valve assembly has been checked before installation.