Globe Stop Valves — Cast Iron Fig. 181, Cast Steel Fig. 280, Gunmetal Fig. 133 Flanged globe stop valves suitable for isolation duty on steam, water, and general industrial service. Cast iron body rated to BS EN 1092-2; cast steel to BS EN 1092-1. Available from DN15 to DN300 depending on material. Multi-turn electric actuators are the standard choice, with spring-return or double-acting pneumatic options available on smaller bore sizes.

Angle Stop Valves — Cast Iron Fig. 182, Cast Steel Fig. 281, Gunmetal Fig. 133L Angle-pattern globe valves for corner installations and applications requiring right-angle flow direction change. Same pressure and temperature ratings as equivalent globe stop valves. Actuator fitment follows the same multi-turn electric or pneumatic approach.

Parallel Slide Gate Valves — Cast Steel Fig. 650 Cast steel parallel slide gate valves rated to PN25/40. Sizes 50mm to 300mm (larger sizes on request). Full-bore, low-pressure-drop design suited to steam, condensate, and high-temperature water. Multi-turn electric actuators are standard for automated operation; gearbox mounting available for larger bore sizes.

Double Regulating Valves — Cast Iron Fig. BV203, Gunmetal Fig. BV307 Oblique pattern double regulating valves for heating and chilled water systems. Available DN15 to DN300. On/off and modulating electric actuators can be fitted to enable automated flow regulation or remote isolation, integrated with building energy management systems (BEMS) and BACnet/Modbus control architectures.

Boiler Crown Valves — Cast Steel Globe Fig. 280DP, Cast Steel Angle Fig. 281DP High-integrity cast steel crown valves for boiler isolation duty. Electric actuator fitment for remote operation and automated sequencing in boiler plant applications. Actuator specification subject to confirmation of operating torque at maximum working pressure.